-
Creation and Production of the USB (Universal Serial Bus)
The initial creation of the USB standard was to find a means of making a standardized connector/port for devices such as mice, keyboards, peripherals, ect. The designers for of this USB were:
-Digital Equipment Corporation
-Compaq
-IBM
-Microsoft
-Nortel
-NEC -
Release of USB 1.0
Data rate of 1.5 Mbit/s and 12 Mbit/s -
Introduction of USB 1.1
Fixed problems with USB 1.0. -
USB 2.0 !
APR 1, 2000
USB 2.0 ! Released in April of 2000, USB 2.0 was considered the Hi-Speed USB and had a rate of data tranfer of up to 480 Mbit/s. -
Mini-A and Mini-B
In octobot of 2000, Mini-A and Mini-B USB connectors were introduced. -
USB 3.0
USB 3.0 was released in November 2008. The standard defines a new SuperSpeed mode with a signaling speed of 5 Gbit/s and a usable data rate of up to 4 Gbit/s (500 MB/s). A USB 3.0 port is usually colored blue, and is backwards compatible with USB 2.0 -
USB 3.1
A January 2013 press release from the USB group revealed plans to update USB 3.0 to 10 Gbit/s -
USB Type-C
USB-C, technically known as USB Type-C, is a 24-pin USB connector system, which is distinguished by its horizontally symmetrical "reversible" connector. The USB Type-C Specification 1.0 was published by the USB Implementers Forum (USB-IF) and was finalized in August 2014. It was developed at roughly the same time as the USB 3.1 specification. A device that implements USB-C does not necessarily implement USB 3.1, USB Power Delivery, or Alternate Mode
