-
Guglielmo Marconi
Guglielmo Marconi: an Italian inventor, proved the feasibility of radio communication. He sent and received his first radio signal in Italy in 1895. By 1899 he flashed the first wireless signal across the English Channel and two years later received the letter "S", telegraphed from England to Newfoundland. -
radio history timeline
CBN History: Radio/Broadcasting Timeline. 1888: Heinrich Hertz detects and produces radio waves. 1894: Marchese Guglielmo Marconi builds his first radio equipment, a device that will ring a bell from 30 ft. away. 1899: Marconi establishes first radio link between England and France. -
audion tube
It had been known since the middle of the 19th century that gas flames were electrically conductive, and early wireless experimenters had noticed that this conductivity was affected by the presence of radio waves. De Forest found that gas in a partial vacuum heated by a conventional lamp filament behaved much the same way, and that if a wire were wrapped around the glass housing, the device could serve as a detector of radio signals. In his original design, a small metal plate. -
the cost of the radio
Price: $8.95
The Nightingale Loudspeaker offers the best in tone and sound for your radio, or you could use a pair of headphones costing about $3.00 -
was the radio ever used
In the 1920s, radio was first used to transmit pictures visible as television. During the early 1930s, single sideband (SSB) and frequency modulation (FM) were invented by amateur radio operators. By 1940, they were established commercial modes. -
radio age
James “Radio” Kennedy, a 69-year-old, mentally challenged man, showed up on football field in the mid-1960's and has been an integral part of the school ever since. -
how dose the radio station work
This carries program signals from huge transmitter antennas, which are connected to the radio station, to the smaller antenna on your radio set. ... Frequency modulation is how FM radio is broadcast; amplitude modulation is the technique used by AM radio stations.May 26, 2017 -
how to become a radio personality
Step 1: Research the Career. Radio announcers usually have a bachelor's degree in communications, journalism or broadcasting. ...
Step 2: Earn a Degree. ...
Step 3: Gain Entry-Level Training. -
how do receivers work
The receiver is at the heart of a typical home theater system. The receiver sends the video on to your television and sends the audio to the decoder. The decoder sorts out the different sound channels from the video signal, and then sends the information to amplifiers for each sound-channel output. -
What is a receiver?
An audio/video receiver (AVR) is a consumer electronics component used in a home theater. Its primary purpose is to receive audio and video signals from a number of sources, processing them to drive loudspeakers and a display. -
What is an integrated stereo amplifier?
An integrated amplifier (pre/main amp) is an electronic device containing an audio preamplifier and power amplifier in one unit, as opposed to separating the two. Most modern audio amplifiers are integrated and have several inputs for devices such as CD players, DVD players, and auxiliary sources. -
How does the radio transmitter work?
An electronic oscillator circuit to generate the radio frequency signal. ... In an AM (amplitude modulation) transmitter the amplitude (strength) of the carrier wave is varied in proportion to the modulation signal. In an FM (frequency modulation) transmitter the frequency of the carrier is varied by the modulation signal.
